Spezilla Tube Co., Ltd. (Shanghai)
Spezilla Tube Co., Ltd. Excellence in Stainless Steel Tubing
Add to Cart
ASME SB111 heat exchanger steel tube, Copper Nickel Alloy Pipe C71500 6096MM Length
Description:
Applications:
Underwater fencing
Sugar plants
Air conditioners
Refrigeration
Oil lines
Gas lines
Industrial machinery
Plumbing
Machinery &equipment
Heat exchanger tubes
Steam tubes
Power plants
Ship building & ship repairs
Condensers
Distillers
Evaporators
Ferrules
Plumbing flanges
Power steering tubes
Salt water piping systems
| Standard Grade | ASTM B 111 C71500 | EN 12451 CuNi30Mn1Fe (CW354H) | DIN 17664/1785 CuNi30Mn1Fe | BS 2871 Part 3 CN 107 | NFA 51102 CuNi30Mn1Fe | JIS H3300 C7150 |
| Cu | Rem. | Rem. | Rem. | Rem. | Rem. | Rem. |
| Pb | 0,05 max. | 0,02 max. | 0,03 max. | 0,01 max. | 0,05 Sn+Pb max. | 0,05 max. |
| Ni | 29,0 - 33,0 | 30,0 - 32,0 | 30,0 - 32,0 | 30,0 - 32,0 | 29,0 - 32,0 | 29,0 - 33,0 |
| Fe | 0,4 - 1,0 | 0,4 - 1,0 | 0,4 - 1,0 | 0,4 - 1,0 | 0,4 - 0,7 | 0,4 - 0,7 |
| Mn | 1,0 max. | 0,5 - 1,5 | 0,5 - 1,5 | 0,5 - 1,5 | 0,5 - 1,5 | 0,2 - 1,0 |
| Zn | 1,0 max. | 0,5 max. | 0,5 max. | - | 0,5 max. | 0,5 max. |
| S | - | 0,05 max. | 0,06 max. | 0,08 max. | 0,02 max. | - |
| Sn | - | 0,05 max. | - | - | - | - |
| P | - | 0,02 max. | - | - | - | - |
| C | - | 0,05 max. | 0,06 max. | 0,06 max. | 0,06 max. | - |
| Co | - | 0,1 max. | - | - | - | - |
| Cu+Ni+Fe+Mn | - | - | - | - | - | 99,5 min. |
| Total Impurities | - | Others Total | Others Total | 0,3 max. | 0,1 max. | - |
| - | 0,2 max. | 0,1 max. | - | - | - | |
| Condition | O61 | R370 | F37 | M | annealed (X690) | O |
| HR50 | R480 | - | O | - | - | |
| - | - | - | - | - | - | |
| Yield Strength | 125 min. | 120 min. | 120 - 220 | - | - | - |
| N/mm² | 345 min. | 300 min. | - | - | - | - |
| - | - | - | - | - | - | |
| Tensile Strength | 360 min. | 370 min. | 370 min. | - | - | 363 min. |
| N/mm² | 495 min. | 480 min. | - | - | - | - |
| - | - | - | - | - | - | |
| Elongation (%) | - | 35 min. | 35 min. | - | - | 30 min. |
| 12 min. (WT<1,21 mm) | 12 min. | - | - | - | - | |
| 15 min. (WT>1,21 mm) | - | - | - | - | - | |
| Hardness Hv5 | - | - | - | 150 min. | 90 - 130 | - |
| - | - | - | 90 - 120 | - | - | |
| - | - | - | - | - | - | |
| Grain Size (mm) | 0,010 - 0,045 | 0,010 - 0,050 | 0,010 - 0,050 | 0,050 max. | 0,010 - 0,045 | 0,010 - 0,045 |
| - | (annealed) | - | (Condition O) | - | - | |
| Typical use: | This alloy has all the characteristics of CuNi 90/10, but also offers excellent corrosion resistance in high velocity sea water. Also the operating temperature is much higher than of CuNi 90/10. Can assure a long service life and reliability. Melting Point: 1240°C • Hot Working Properties: Good Density (20°C): 8,94 g/cm³ • Cold Working Properties: Good | |||||
| Weight formula: | Average Wall: Minimum Wall: | (OD-WT) x WT x 0,0284 = Kg/m (all sizes in mm) (OD-WT) x WT x 0,0295 = Kg/m (all sizes in mm) | ||||
